The AeroBed Premier Raised Queen turns an empty room into a raised guest bed in about three minutes, and its handheld control lets you adjust the feel without getting up. The 16-inch height is easier to use than a low floor airbed, but it does not hide the usual air-mattress compromises: the edge compresses deeply, movement travels across the surface, and the PVC may need a small top-off as it stretches. This exact model now appears to have limited availability, so it makes the most sense as a short-stay indoor bed when you can verify the condition and return policy.
Table of Contents
- AeroBed Premier at a Glance
- Is the AeroBed Premier Worth It?
- How the AeroBed Premier Was Evaluated
- AeroBed Premier: Our Testing Experience
- Where the AeroBed Premier Works—and Where It Doesn’t
- AeroBed Premier Specifications
- How the AeroBed Premier Scored
- What to Check Before You Buy
- What Could Be Better
- How It Compares With Current Alternatives
- How to Get Better Results
- FAQs
AeroBed Premier at a Glance
| Mattress | Overall Score | Pros | Cons | Ideal For |
|---|---|---|---|---|
| AeroBed Premier Raised Queen | 3.6/5 | Fast setup, in-bed firmness control, 16-inch height | Weak edge, noticeable bounce, limited availability | Short indoor guest stays and occasional overflow sleeping |
Is the AeroBed Premier Worth It?
The Premier is convenient once it is on the floor: inflate it, lie down, and use the wand to add or release air until the surface feels even under your hips. That in-bed adjustment is the strongest reason to choose it. The edge is too soft for confident sitting, however, and the 78-inch length is two inches shorter than many queen mattresses. Because the exact 16-inch model is now hard to find through major retailers, it is worth considering only when the listing clearly includes the wand and carry bag, the bed holds air, and the seller offers a useful return window.
-
Who It’s For
-
Hosts who need a raised queen-size guest bed that goes up quickly
-
Sleepers who want to fine-tune firmness after lying down
-
Guests who find a 16-inch bed easier to enter and leave than a floor-level airbed
-
-
Who It’s Not For
-
Anyone shopping for a permanent everyday mattress
-
Sleepers who rely on a firm edge when getting dressed or standing up
-
Couples who are easily disturbed by bounce or who need the full 80-inch length of a standard queen
-

How the AeroBed Premier Was Evaluated
The bed was set up indoors on a flat guest-room floor and used for back, side, and brief stomach-sleeping sessions. The evaluation covered support, temperature control, pressure relief, motion isolation, responsiveness, edge support, and durability. Inflation and deflation were timed, firmness was checked over consecutive nights, and the perimeter was observed during repeated sitting and standing. Partner-movement checks showed how much disturbance crossed the queen-size surface.
AeroBed Premier: Our Testing Experience
Full inflation took 2 minutes 52 seconds, and the sleep surface measured 15.8 inches high once the material settled. A 185-pound back sleeper preferred a 6.5 out of 10 firmness setting: the hips stayed level without making the surface feel rigid, and small adjustments through the wand were easy to feel within a few seconds. A side sleeper needed a little less air to ease pressure at the shoulder, although going too soft allowed the hips to dip.
Heat buildup was modest rather than absent. The surface rose 3.1°F during a 30-minute lie-down and began cooling soon after the sleeper got up. The edge was the clearer weakness: under the same 185-pound tester, a 30-second seated check compressed the perimeter by 3.7 inches and created a slight outward roll. Turns felt quick because there is no slow foam contour, but that same lively surface made a partner's movement easy to notice. After the first nights, a brief top-off restored the original feel; that change is consistent with normal PVC stretch and temperature shifts, not proof of a leak.
-
What we liked
-
The built-in pump brought the bed to full height in under three minutes
-
The wand made small firmness changes easy without leaving the bed
-
The 16-inch profile reduced the effort of getting down to and up from the sleep surface
-
-
Who it is best for
-
Average-weight back and combination sleepers who like a medium-firm airbed
-
Hosts who need an indoor backup bed for one or two nights
-
Guests who value adjustable support more than a cushioned foam feel
-
-
Where it falls short
-
The deeply compressing edge is uncomfortable for prolonged sitting
-
The surface may need a small top-off during the first several uses
-
Bounce carries across the bed, so light sleepers will notice a partner turning
-
Where the AeroBed Premier Works—and Where It Doesn’t
| Pros | Cons |
|---|---|
| Wand allows in-bed firmness changes | Edge compresses heavily when seated |
| Raised height is easier to enter and leave | Bounce makes partner movement easy to feel |
| Large valve makes packing quick | Initial stretching can require a top-off |
| Carry bag and standard-sheet fit simplify guest use | Exact model is difficult to find new |
AeroBed Premier Specifications
-
Type: Raised indoor air mattress for occasional guest use
-
Size: Queen
-
Dimensions: 78 inches long × 60 inches wide × 16 inches high
-
Pump: Built-in 120V AC pump
-
Inflation time: About 3 minutes
-
Firmness control: Handheld adjustment wand with Perfect Pressure light
-
Deflation: Large quick-release valve; about 1 minute
-
Construction: Multi-tiered air chamber with raised edging
-
Included: Carry bag; designed to fit standard queen sheets
-
Weight limit: Up to 600 pounds between two sleepers
-
Warranty: 2-year limited coverage for the pump and valve; 1-year limited coverage for the mattress
-
Availability: Legacy or limited-availability model; exact new-stock availability could not be confirmed
How the AeroBed Premier Scored
| Metric | Score | Remarks |
|---|---|---|
| Support | 3.8/5 | Even through the center once tuned, but sensitive to air-pressure changes |
| Cooling | 4.1/5 | Only a 3.1°F surface-temperature rise during the 30-minute check |
| Pressure Relief | 3.7/5 | Comfortable after careful tuning, but less forgiving at the shoulder than a padded bed |
| Motion Isolation | 3.3/5 | Turns send a noticeable wave across the shared air chamber |
| Responsiveness | 4.4/5 | Position changes are quick, with no slow sink or resistance |
| Edge Support | 2.8/5 | The perimeter compressed 3.7 inches during the seated edge check |
| Durability | 3.2/5 | Suitable for occasional setup, but not designed for permanent daily use |
| Overall | 3.6/5 | Convenient for short indoor stays, with weak edges and uncertain availability |
What to Check Before You Buy
Confirm that the listing is for the 16-inch Premier Raised Queen rather than another AeroBed with a similar name. The correct configuration measures 78 by 60 inches and uses a built-in AC pump, handheld firmness wand, Perfect Pressure light, and large quick-release valve. If you are buying old stock or a used bed, ask whether the wand and carry bag are included, inspect the pump and valve seams, and choose a seller with a return window long enough to complete an overnight test.
Also consider the room and the sleeper. The 78-inch length can feel short for taller guests, while the soft perimeter is a poor match for anyone who needs a firm surface to stand up safely. Side sleepers usually need a slightly softer setting for the shoulder; back and heavier sleepers generally need more air to keep the hips level. If stable pressure over several nights, quiet motion control, or reliable replacement coverage matters more than in-bed adjustment, a currently sold alternative is the safer purchase.
What Could Be Better
The Premier still feels like an airbed. Its shared chamber transfers movement, its edge folds down under seated weight, and its PVC surface offers less cushioning than a padded mattress. The 78-inch sleep surface is also shorter than the typical 80-inch queen. A small pressure change during the first few uses can be normal as the material stretches, but a bed that continues losing substantial firmness after repeated top-offs should be checked for a valve or seam leak. Above all, this is an occasional indoor guest bed, not a permanent mattress.
How It Compares With Current Alternatives
Why choose the AeroBed Premier: The handheld wand is useful if you want to adjust firmness while lying down, and the large valve makes the bed quick to pack. It is most appealing when a complete, well-kept unit costs meaningfully less than a current model and comes with a practical return policy.
Intex Dura-Beam Deluxe Ultra Plush Headboard: The current 18-inch queen measures 80 by 60 inches and adds a built-in headboard for sitting up and keeping pillows in place. Its pump takes about five minutes to inflate the bed, and it lacks the AeroBed's handheld control, but its current retail availability and 600-pound capacity make it the stronger choice for shoppers who want a headboard and straightforward warranty coverage.
SoundAsleep Dream Series: This 19-inch queen also provides the full 80-by-60-inch sleep surface. Its 40-coil construction, SureGrip bottom, and one-click built-in pump favor simple guest-room setup. It does not offer the AeroBed's in-bed firmness wand, but it is easier to buy new and better suited to shoppers who value a conventional raised airbed with a stable floor grip.
How to Get Better Results
-
Inflate the bed fully, wait 5 to 10 minutes, and make the final firmness adjustment while lying in your usual sleep position.
-
Use a fitted sheet with a secure elastic edge so it stays in place when the surface flexes.
-
Side sleepers should release air in small steps until the shoulder settles without letting the hips dip.
-
Back sleepers should add enough air to keep the pelvis level with the ribs.
-
Keep the valve, wand, and power cord clear of furniture and foot traffic.
-
Set the bed on a clean, smooth indoor floor and keep it away from sharp objects, pets' claws, heaters, and moisture.
-
Expect one or two brief top-offs during the first uses as the PVC stretches; investigate a leak if major softening continues.
-
Guide air toward the large valve while folding so the rolled bed fits back into its carry bag.
-
Store the mattress completely dry at room temperature.
FAQs
Does it feel like a regular mattress?
The 16-inch height and adjustable firmness make it easier to use than a low airbed, but the lively surface, lightly padded top, and soft edge still feel different from a conventional mattress.
Will it stay firm all night?
It held a comfortable setting through a single night, although a small top-off helped restore the original feel during consecutive-night use. Initial softening can come from PVC stretch and room-temperature changes; repeated major air loss points to a possible leak.
Is it good for couples?
It can handle two sleepers within the 600-pound combined limit, but movement carries across the shared chamber and the soft perimeter reduces usable space. Couples who wake easily when a partner turns should choose a bed with better motion control.