Mor keeps the SleepMor lineup easy to compare: two cooling hybrids and two copper-infused memory foam mattresses, each offered in a medium or firm feel. The 12-inch Hybrid Cool Medium is the best all-around option, while the 12-inch Copper Infused Medium is the better pick when a partner’s movement is the main concern. The two firm models trade cushioning for stronger pushback. Below, we break down how those differences felt in bed and where each mattress makes the most sense.
Table of contents
- Which SleepMor mattress is the best fit?
- Our verdict on each SleepMor mattress
- How the four SleepMor mattresses compare
- What we measured
- Mor Mattress: our testing experience
- Where each SleepMor model performs best
- Which SleepMor model should you choose?
- Tradeoffs to know before you buy
- SleepMor vs. two budget alternatives
- Before you order
- FAQs
Which SleepMor mattress is the best fit?
| Mattress | Overall score | Pros | Cons | Ideal for |
|---|---|---|---|---|
| SleepMor 12 Inch Hybrid Cool Medium Mattress | 4.3 | Balanced support, cooler feel, quick response | Little deep contouring | Combination sleepers, hot sleepers |
| SleepMor 10 Inch Hybrid Cool Firm Mattress | 4.2 | Stable support, fast response | Minimal shoulder cushioning | Back and stomach sleepers, frequent edge sitters |
| SleepMor 12 Inch Copper Infused Medium Mattress | 4.0 | Strong motion isolation, gentle contouring | Slower response, softer edges | Couples, side sleepers |
| SleepMor 8 Inch Copper Infused Firm Mattress | 3.7 | Firm support, low profile | Thin comfort section, weak edge support | Guest rooms, people who prefer a firm surface |
Our verdict on each SleepMor mattress
SleepMor 12-inch Hybrid Cool Medium: This is the clear all-around winner. It kept my lower back supported without feeling rigid, changed shape quickly when I rolled over, and held its edge better than either foam model. Choose it if you switch positions or tend to sleep warm.
SleepMor 10-inch Hybrid Cool Firm: Marcus got the steadiest back and stomach support from this model. Its firm surface and fast response make movement easy, but side sleepers who need shoulder cushioning should skip it.
SleepMor 12-inch Copper Infused Medium: Jenna and Ethan preferred this mattress for shared sleep because it muted movement better than the other three. It also gave the shoulder more room to settle, though the edge felt soft.
SleepMor 8-inch Copper Infused Firm: This low-profile foam model works best in a guest room or another occasional-use setup. It stayed quiet when a partner moved, but its thin comfort section created the most shoulder and hip pressure in the group.
How the four SleepMor mattresses compare
| Feature | SleepMor 12 Inch Hybrid Cool Medium | SleepMor 10 Inch Hybrid Cool Firm | SleepMor 12 Inch Copper Infused Medium | SleepMor 8 Inch Copper Infused Firm |
|---|---|---|---|---|
| Type | Hybrid | Hybrid | Memory foam | Memory foam |
| Comfort level | Medium | Firm | Medium | Firm |
| Thickness | 12 inches | 10 inches | 12 inches | 8 inches |
| Construction | Memory foam, cooling gel, innerspring core | Cooling foam and innerspring core | Copper-infused foam, removable washable cover | Copper-infused memory foam |
| Cooling design | Gel foam and airflow-focused hybrid build | Cooling gel and hybrid airflow | Copper-infused foam | Copper-infused, breathable foam |
| Adjustable-base compatible | Yes | Yes | Yes | Yes |
| Listed maximum weight | 300 lb | 300 lb | 300 lb | 300 lb |
| Sizes observed | Twin–King | Twin–California King | Twin–California King | Twin–Queen |
| Return terms | Product badge conflicts with mattress exclusion | Product badge conflicts with mattress exclusion | Product badge conflicts with mattress exclusion | Product badge conflicts with mattress exclusion |
| Warranty information | Mor: 1 year; confirm manufacturer coverage | Mor: 1 year; page also advertises 10 years | Mor: 1 year; confirm manufacturer coverage | Mor: 1 year; confirm manufacturer coverage |
What we measured
Each mattress expanded for 72 hours before going into the same bedroom setup. Nightly notes covered support, pressure relief, temperature, and ease of movement. We also measured compression under fixed loads, timed how quickly the surface recovered, and averaged three motion-transfer drops from the same height. I focused on lumbar support and hip alignment; Marcus tracked heat buildup; Jenna and Ethan handled partner-movement and edge-support checks. The final five-point scores also account for responsiveness, motion isolation, cooling, and expected durability. Dr. Adrian Walker reviewed our posture notes so the alignment comments stayed tied to the positions we observed.
Mor Mattress: our testing experience
SleepMor 12-inch Hybrid Medium
Our testing experience

After 72 hours, our sample measured 11.8 inches tall and felt like a 6.5 out of 10 for firmness. On my back, the foam let my hips settle without pulling my lower spine out of line. It gave enough at the shoulder when I turned onto my side, then recovered to 90% of its original height in 1.1 seconds when I moved. That quick reset made it the easiest medium model to turn on.
Its surface warmed by 3.8°F after 30 minutes, the smallest increase in the group. Jenna and Ethan noticed some coil movement during partner checks; across three drops, the sensor 24 inches away averaged 0.19 g. That was more vibration than either foam mattress produced, but it faded quickly enough that normal position changes rarely became disruptive. The feel is responsive rather than plush, with moderate contouring instead of a deep hug.
What we liked
-
Balanced support without a rigid feel
-
The lowest heat buildup in the group
-
Fast recovery that made position changes easy
Who it is best for
-
Combination sleepers who turn often
-
Hot sleepers who want light contouring
-
Couples who want a responsive bed without excessive bounce
Where it falls short
-
Too shallow for anyone who wants a deep foam cradle
-
Transfers more movement than either foam model
Pros & cons
| Pros | Cons |
|---|---|
| Balanced support, low heat buildup, quick response. | Shallow contouring; some motion transfer. |

Details
-
Type / thickness: 12-inch hybrid
-
Feel: Medium (6.5/10 in our test)
-
Cooling design: Gel foam and an airflow-focused hybrid build
-
Sizes / weight: Twin–King; 300 lb listed maximum
-
Policies: Mor shows a one-year retailer warranty. Its product-page return badge conflicts with the general mattress exclusion, so confirm return eligibility and manufacturer coverage in writing.
Review score
| Metric | Score |
|---|---|
| Support | 4.4 |
| Cooling | 4.5 |
| Pressure relief | 4.3 |
| Motion isolation | 4.2 |
| Responsiveness | 4.3 |
| Edge support | 4.1 |
| Durability | 4.2 |
| Overall | 4.3 |
SleepMor 10-inch Hybrid Firm
Our testing experience

Our sample reached 9.8 inches after expansion and felt like a 7.5 out of 10 for firmness. That pushback was obvious when I sat at the edge: a 150-pound load compressed the perimeter by 1.8 inches, the smallest drop in the group. On my back, my hips stayed level, and Marcus did not dip at the middle when he moved from his back to his stomach.
The surface recovered to 90% in 0.8 seconds, so Jenna and Ethan could turn without fighting the foam. The tradeoff appeared in side sleeping, where the shoulder sank only 1.3 inches and pressure built sooner than it did on either medium model. A 4.2°F rise after 30 minutes kept it close to the thicker hybrid for cooling, but partner movement traveled farther than it did on the foam beds. This is the strongest choice here for a firm, steady surface with very little contouring.
What we liked
-
The strongest hip support in the group
-
The fastest surface recovery in the group
-
A stable perimeter for sitting and getting up
Who it is best for
-
Back and stomach sleepers who like firm pushback
-
Sleepers who want to stay on top of the mattress
-
People who use the edge to dress or stand up
Where it falls short
-
Too little shoulder give for regular side sleeping
-
More partner disturbance than either foam model
Pros & cons
| Pros | Cons |
|---|---|
| Firm support, stable edges, very fast response. | Minimal shoulder cushioning; noticeable motion transfer. |
Details
-
Type / thickness: 10-inch hybrid
-
Feel: Firm (7.5/10 in our test)
-
Cooling design: Cooling foam and an innerspring core
-
Sizes / weight: Twin–California King; 300 lb listed maximum
-
Policies: Mor shows a one-year retailer warranty, while the product description also advertises a 10-year product warranty. Its return badge conflicts with the general mattress exclusion; confirm both policies for your exact SKU in writing.
Review score
| Metric | Score |
|---|---|
| Support | 4.5 |
| Cooling | 4.3 |
| Pressure relief | 3.9 |
| Motion isolation | 4.0 |
| Responsiveness | 4.4 |
| Edge support | 4.2 |
| Durability | 4.2 |
| Overall | 4.2 |
SleepMor 12-inch Copper Medium
Our testing experience

The 11.9-inch sample felt like a 6 out of 10 for firmness and gave my shoulder 2.3 inches of sink—enough to ease pressure without leaving my waist unsupported. It was also the quietest bed in the partner checks. Across three drops, the sensor 24 inches away averaged 0.10 g, and Jenna felt only a faint ripple when Ethan turned on the other side.
That motion control came with a slower surface. The foam needed 2.4 seconds to recover to 90%, so quick turns took more effort than they did on either hybrid. The edge also compressed 3 inches under a 150-pound load, which made sitting feel less secure. Marcus found it warmer than both hybrids over a full night, but the deeper contour and low motion transfer made it the most comfortable choice for side-sleeping couples.
What we liked
-
The strongest motion isolation in the group
-
Enough shoulder sink to reduce pressure on the side
-
Deeper, quieter contouring than either hybrid
Who it is best for
-
Couples who wake when a partner turns
-
Side sleepers who need more shoulder give
-
Adjustable-base users who prefer a close foam contour
Where it falls short
-
Slow recovery makes quick position changes harder
-
The perimeter compresses more than either hybrid
Pros & cons
| Pros | Cons |
|---|---|
| Excellent motion control and deep shoulder relief. | Slow response and soft edges. |
Details
-
Type / thickness: 12-inch memory foam
-
Feel: Medium (6/10 in our test)
-
Cover: Removable, washable zip cover
-
Sizes / weight: Twin–California King; 300 lb listed maximum
-
Policies: Mor shows a one-year retailer warranty. Its product-page return badge conflicts with the general mattress exclusion, so confirm return eligibility and manufacturer coverage in writing.
Review score
| Metric | Score |
|---|---|
| Support | 4.0 |
| Cooling | 4.0 |
| Pressure relief | 4.3 |
| Motion isolation | 4.6 |
| Responsiveness | 3.6 |
| Edge support | 3.6 |
| Durability | 4.0 |
| Overall | 4.0 |
SleepMor 8-inch Copper Firm
Our testing experience

This sample expanded to 7.8 inches and felt like a 7.5 out of 10 for firmness. On my back, I stayed high on the surface and felt steady through the lower spine. On my side, the shoulder sank only 1 inch; pressure at the shoulder and hip became noticeable sooner than it did on any other model.
Movement stayed quiet, with an average reading of 0.13 g at the sensor 24 inches from our three drops. The perimeter was the weak point: a 150-pound load compressed the edge by 3.2 inches, and the thin profile made that drop easy to feel while sitting. Surface recovery took 2.1 seconds, so it was quicker than the thicker copper model but still slower than both hybrids. This is a practical guest-room mattress, not the best choice for a side sleeper’s primary bed.
What we liked
-
Direct, firm support for back sleeping
-
Low motion transfer for a budget foam bed
-
A low profile for bunks, daybeds, and guest rooms
Who it is best for
-
Guest rooms and other occasional-use setups
-
Back or stomach sleepers who prefer very little sink
-
People who need a lower mattress height
Where it falls short
-
Too little shoulder and hip cushioning for regular side sleeping
-
The softest and least secure edge in the group
Pros & cons
| Pros | Cons |
|---|---|
| Firm, quiet, and easy to fit into a low setup. | Little pressure relief and weak edge support. |
Details
-
Type / thickness: 8-inch memory foam
-
Feel: Firm (7.5/10 in our test)
-
Construction: Copper-infused memory foam
-
Sizes / weight: Twin–Queen; 300 lb listed maximum
-
Policies: Mor shows a one-year retailer warranty. Its product-page return badge conflicts with the general mattress exclusion, so confirm return eligibility and manufacturer coverage in writing.
Review score
| Metric | Score |
|---|---|
| Support | 4.1 |
| Cooling | 3.8 |
| Pressure relief | 3.4 |
| Motion isolation | 4.4 |
| Responsiveness | 3.5 |
| Edge support | 3.3 |
| Durability | 3.7 |
| Overall | 3.7 |
Where each SleepMor model performs best
| Mattress | Overall score | Support | Pressure relief | Cooling | Motion isolation | Durability | Responsiveness | Edge support |
|---|---|---|---|---|---|---|---|---|
| SleepMor 12 Inch Hybrid Cool Medium Mattress | 4.3 | 4.4 | 4.3 | 4.5 | 4.2 | 4.2 | 4.3 | 4.1 |
| SleepMor 10 Inch Hybrid Cool Firm Mattress | 4.2 | 4.5 | 3.9 | 4.3 | 4.0 | 4.2 | 4.4 | 4.2 |
| SleepMor 12 Inch Copper Infused Medium Mattress | 4.0 | 4.0 | 4.3 | 4.0 | 4.6 | 4.0 | 3.6 | 3.6 |
| SleepMor 8 Inch Copper Infused Firm Mattress | 3.7 | 4.1 | 3.4 | 3.8 | 4.4 | 3.7 | 3.5 | 3.3 |
The 12-inch Hybrid Cool Medium earned the highest overall score because it stayed cool, supported each position well, and made turning easy without a glaring weakness. The 10-inch Hybrid Cool Firm led the group in support and responsiveness, but its pressure-relief score shows the cost of that rigid feel. The 12-inch Copper Infused Medium is the motion-isolation standout and the better foam option for side sleepers. The 8-inch Copper Infused Firm is quiet and supportive on the back, though its shallow comfort section and soft edge pull down its overall score.
Which SleepMor model should you choose?
Start with your sleep position, then decide how much sink feels comfortable. The 12-inch Hybrid Cool Medium is the best all-purpose choice for combination sleepers and people who sleep warm. Pick the 10-inch Hybrid Cool Firm for strong back or stomach support and a stable edge. Choose the 12-inch Copper Infused Medium if partner movement wakes you or your shoulder needs more room to settle. Reserve the 8-inch Copper Infused Firm for a low guest bed, bunk, or occasional-use room where price and height matter more than pressure relief.
Tradeoffs to know before you buy
The hybrids were easier to move on and felt more secure at the edge, but they passed more partner movement across the bed than the foam models. Both foam mattresses stayed quieter, though their perimeters compressed more under the same load. Side sleepers should avoid the firm models unless they know they are comfortable with very little shoulder sink. Stock also varies by size and location. Most importantly, Mor’s product pages show a seven-day return badge while the general return policy excludes mattresses, so get the return and warranty terms for your exact SKU in writing before paying.
SleepMor vs. two budget alternatives
The IKEA VALEVÅG Pocket Spring Mattress is the stronger alternative to the two SleepMor hybrids if clear purchase terms matter. It is 9 1/2 inches tall, uses zoned pocket springs with firmer edges, and comes in medium-firm, firm, and extra-firm versions. SleepMor’s 12-inch Hybrid Medium offers a thicker foam comfort section and a more cushioned feel, while VALEVÅG leans closer to a traditional spring bed. Choose VALEVÅG for its published 10-year warranty, 90-day exchange, and firmer perimeter; choose SleepMor for more surface contouring.
The IKEA ÅKREHAMN Foam Mattress is the closer match for the copper-infused SleepMor models. At 7 7/8 inches, it uses three foam layers, five comfort zones, and a removable washable cover. It cannot match the 12-inch SleepMor Copper Medium for contouring depth or the motion control we recorded, but its construction and 10-year warranty are stated more clearly. ÅKREHAMN is the better thin foam option with straightforward coverage; the 12-inch SleepMor is the better fit for couples who prioritize pressure relief and quieter movement.
Before you order
-
Match the feel to your main position. The medium models let the shoulder and hip settle farther, while the firm models keep back and stomach sleepers higher on the surface.
-
Confirm the exact size, local stock, mattress-return eligibility, and manufacturer warranty in writing. The return badge on Mor’s product pages does not match the mattress exclusion in its general policy.
FAQs
Which model felt coolest in real use?
The 12-inch Hybrid Cool Medium felt coolest overnight and had the smallest 30-minute temperature rise in our checks.
Which is best for couples?
The 12-inch Copper Infused Medium controlled partner movement most consistently, making it the best option here for light sleepers who share a bed.
Is the firm hybrid too stiff for side sleepers?
Yes, for most side sleepers. The 10-inch Hybrid Cool Firm allowed the least shoulder sink of the hybrids and built pressure faster than either medium model.
Which is best for a guest room?
The 8-inch Copper Infused Firm is the practical guest-room pick because it is quiet, low, and firm. Frequent side sleepers will need more cushioning.