Loom & Leaf is built for sleepers who enjoy memory foam’s close contour but want a substantial mattress delivered at full size and set up in the room. Both 12-inch versions pair dense foam with a quilted cover made with organic cotton. Relaxed Firm provides the better pressure relief, while Firm holds the body higher and makes position changes easier. Both are especially good at keeping movement from spreading across the bed.
Table of Contents
Loom & Leaf at a Glance
| Feature | Loom & Leaf Relaxed Firm | Loom & Leaf Firm |
|---|---|---|
| Type | All-foam memory foam | All-foam memory foam |
| Firmness | 5–7/10 (medium-firm range) | 8/10 (firm) |
| Height | 12 inches | 12 inches |
| Queen weight | 93 lbs | 93 lbs |
| Foam build | Lumbar gel crown; 2" perforated gel memory foam; 2.5" 5-lb memory foam; 2" transition foam; 5.5" base foam | Same core design with a firmer transitional layer |
| Cover | Quilted cover made with organic cotton | Quilted cover made with organic cotton |
| Trial | 365-night home trial | 365-night home trial |
| Warranty | Lifetime warranty | Lifetime warranty |
| Price (Queen) | $3,049 regular price | $3,049 regular price |
What Stood Out
Relaxed Firm is the easier recommendation for most sleepers. It kept my hips supported while allowing more room for the shoulders, and Mia clearly preferred it on her side. Firm gave Marcus the flatter surface he wanted for back sleeping and helped Ethan turn with less effort, but it put more pressure on the shoulder. Both versions performed well for motion isolation. Temperature control was merely average among the all-foam beds in our mattress reviews.
How We Evaluated Each Firmness
Both comfort levels were used for several nights and went through the same mattress testing process. We compared pressure relief, spinal alignment, ease of movement, edge stability, motion transfer, and heat buildup under matching conditions.
- Pressure relief (side sleep)
- Cooling & breathability
- Motion isolation
- Responsiveness
- Edge support
- Support & alignment
Testers rotated between the two beds, and we repeated the load checks with 120- and 200-pound test weights. Using the same loads on each version made the differences in sinkage, edge compression, and motion transfer easier to isolate.
Which Firmness Should You Choose?
The two versions use the same basic construction, so the decision is mostly about firmness and contour. Relaxed Firm gives the shoulders and hips more room to settle. Firm compresses less and keeps the body closer to the surface. If you dislike the deeper sink associated with memory foam, choose Firm.
- Choose Relaxed Firm if you want a medium feel, sleep mainly on your side, switch between your side and back, or need more cushioning around the shoulders and hips.
- Choose Firm if you sleep mainly on your back or stomach, prefer less sink, or want a more responsive surface for changing positions.
Both versions kept partner movement from traveling far across the surface. Neither is a strong choice for a very hot sleeper, though; beds with coils or more open materials allow noticeably more airflow.
Start with Relaxed Firm when shoulder or hip pressure is the concern. Choose Firm when keeping the midsection level matters more than deep cushioning.
Loom & Leaf: Our Testing Experience
Loom & Leaf Relaxed Firm
Relaxed Firm felt noticeably more forgiving. Its memory foam filled the space around the body without letting the hips sag, and the shoulder settled more comfortably during side sleeping. On the back, the denser lower foams kept the midsection from drifting too far down. Movement faded quickly across the surface, although the foam still held more warmth than a breathable hybrid.
Mattress Review Score
| Category | Score | Notes |
|---|---|---|
| Pressure Relief | 4.7 | Strong side-sleep cushioning |
| Cooling | 3.8 | Average heat control for foam |
| Motion Isolation | 4.6 | Minimal motion transfer |
| Responsiveness | 4.2 | Some effort required to turn |
| Edge Support | 4.1 | Stable for an all-foam bed |
| Support | 4.4 | Steady midsection support |
| Overall Score | 4.3 | Best balance of contour and support |
Mattress Details
- Type: All-foam memory foam
- Firmness: Relaxed Firm (5–7/10)
- Total height: 12 inches
- Weight (Queen): 93 lbs
- Cover: Quilted cover made with organic cotton and lumbar-zone quilting
- Comfort layers: Gel-infused lumbar crown; 2" gel-infused perforated memory foam
- Deeper foam layers: 2.5" 5-lb memory foam and a 5.5" base
- Transition layer: 2" loft pad
- Weight limit: Up to 300 lbs per sleeper
- Trial: 365-night home trial
- Warranty: Lifetime warranty
- Shipping: Free in-room delivery & setup
Our Testing Experience
Relaxed Firm was strongest for side sleeping. Mia’s shoulder settled into the 5–7/10 surface without pushing her torso upward, while the 12-inch build still supported her waist and hips. The 120-pound test weight produced a shallower contour; the 200-pound load reached farther into the comfort foam but remained supported by the transition layer. That result fits the 4.7 pressure-relief score. In the partner check, movement faded before reaching the far side, consistent with its 4.6 motion-isolation score. The edge compressed under a seated load, but it stayed usable for an all-foam mattress.
What we liked:
- Strong shoulder and hip pressure relief
- Close contour without a deep, stuck-in-the-bed feel
- Minimal motion transfer between partners
- Enough midsection support for side and back sleeping
Who it is best for:
- Side sleepers with sensitive shoulders or hips
- Side-and-back combination sleepers who want a medium feel
- Couples who are easily disturbed by movement
Where it falls short:
- Most stomach sleepers will get better hip support from Firm
- Heat control is average for memory foam
- The perimeter compresses more than a reinforced coil edge
Loom & Leaf Firm
Firm kept the body higher and compressed less through the comfort layers. Marcus preferred the flatter surface for back sleeping, and Ethan changed positions with less effort because he did not have to move out of a deep contour. The tradeoff is clear: the firmer surface supports the midsection better but gives a sensitive shoulder much less room to settle.
Mattress Review Score
| Category | Score | Notes |
|---|---|---|
| Pressure Relief | 4.2 | Best during back sleeping |
| Cooling | 3.8 | Average heat control for foam |
| Motion Isolation | 4.6 | Minimal motion transfer |
| Responsiveness | 4.3 | Easier to turn than Relaxed Firm |
| Edge Support | 4.1 | Stable for an all-foam bed |
| Support | 4.6 | Strong midsection alignment |
| Overall Score | 4.3 | Best for firm, stable support |
Mattress Details
- Type: All-foam memory foam
- Firmness: Firm (8/10)
- Total height: 12 inches
- Weight (Queen): 93 lbs
- Cover: Quilted cover made with organic cotton and lumbar-zone quilting
- Foam layers: Lumbar gel crown; 2" perforated gel memory foam; 2.5" 5-lb memory foam; 2" firmer-tuned transition foam; 5.5" base
- Weight limit: Up to 300 lbs per sleeper
- Trial: 365-night home trial
- Warranty: Lifetime warranty
- Shipping: Free in-room delivery & setup
- Price (Queen): $3,049 before promotions
Our Testing Experience
Firm performed best for alignment and movement. At 8/10, it barely yielded beneath the 120-pound test weight and compressed more evenly than Relaxed Firm under 200 pounds. That steadier surface kept our hips level on the back and held the pelvis higher during stomach sleeping, matching the 4.6 support score. Turning took less effort than it did on Relaxed Firm, while motion isolation still reached 4.6. On the side, however, the shoulder met immediate resistance and needed more cushioning.
What we liked:
- A flat, stable surface for back sleeping
- Easier position changes than on Relaxed Firm
- Minimal motion transfer
- Stronger midsection support than Relaxed Firm
Who it is best for:
- Back sleepers who prefer a firm, flat surface
- Stomach sleepers who need firmer hip support
- Combination sleepers who do not want to fight a deep contour
Where it falls short:
- Most side sleepers will need more shoulder cushioning
- Heat control is average for an all-foam mattress
- The perimeter compresses more than a reinforced coil edge
Key Specs Side by Side
| Feature | Loom & Leaf Relaxed Firm | Loom & Leaf Firm |
|---|---|---|
| Type | All-foam memory foam mattress | All-foam memory foam mattress |
| Firmness | 5–7/10 (medium-firm range) | 8/10 (firm) |
| Height | 12" | 12" |
| Weight | 93 lbs (queen) | 93 lbs (queen) |
| Trial | 365 nights | 365 nights |
| Return fee | $99 processing fee | $99 processing fee |
| Warranty | Lifetime | Lifetime |
| Weight limit | Up to 300 lbs per sleeper | Up to 300 lbs per sleeper |
How the Two Firmness Options Scored
| Category | Loom & Leaf Relaxed Firm | Loom & Leaf Firm |
|---|---|---|
| Pressure Relief | 4.7 | 4.2 |
| Cooling | 3.8 | 3.8 |
| Motion Isolation | 4.6 | 4.6 |
| Responsiveness | 4.2 | 4.3 |
| Edge Support | 4.1 | 4.1 |
| Support | 4.4 | 4.6 |
| Overall | 4.3 | 4.3 |
The scores make the tradeoff easy to see. Both versions were excellent at limiting motion, while cooling was their weakest shared category. Relaxed Firm is the better pressure-relief choice. Firm provides stronger support and is slightly easier to move on.
How Does Loom & Leaf Compare?
Why Loom & Leaf stands out
- You want a premium all-foam mattress with dense, slow-moving memory foam.
- You share a bed and want very little motion transfer.
- You want a choice of two firmness levels within the same basic design.
- You value included in-room setup and a quilted surface.
Alternatives worth considering
Tempur-Pedic TEMPUR-Adapt Medium: This current 11-inch all-foam model contours more slowly and closely than either Loom & Leaf version. It is the better choice if the dense, enveloping TEMPUR feel is the priority. Loom & Leaf offers more firmness flexibility, a quilted surface, and included in-room setup.
Nectar Premier Memory Foam: The current 13-inch Nectar Premier costs much less and has a balanced medium-firm feel. It is the stronger value option. Loom & Leaf justifies part of its premium with a 5-lb memory-foam core, a true Firm choice, and full-size delivery with in-room setup.
Getting the Most from Loom & Leaf
- Give the surface a few weeks before judging the firmness. The foams feel stiffer at first and loosen slightly as they break in.
- Use body weight and sleep position as your starting point. Firm suits back and stomach sleepers, as well as anyone who dislikes sink.
- Use a supportive base. A solid platform or slats spaced less than 4 inches apart will keep the mattress level; queen and larger frames also need center support.
- Choose breathable bedding. A light protector and airy sheets help reduce heat around the dense foam.
- Both comfort levels work with an adjustable base. Firm resists bending slightly more, while Relaxed Firm follows the base more readily.
- Start with Relaxed Firm for shoulder cushioning and choose Firm for stronger hip support.
FAQs
Is Loom & Leaf a true memory foam mattress?
Yes. Both versions are all-foam beds with slow-response memory foam in the comfort system. They contour more closely and absorb more movement than most spring-based mattresses.
Is the Firm version too hard for side sleepers?
For most side sleepers, yes. Anyone who develops pressure quickly at the shoulder will be more comfortable on Relaxed Firm. Firm only makes sense for a side sleeper who strongly prefers minimal sink and does not need much cushioning.
Does the Loom & Leaf sleep hot?
It sleeps warmer than a breathable hybrid. The perforated gel foam limits some heat buildup, but temperature control remained average for an all-foam mattress. People who overheat easily should consider a design with more airflow.
Is there fiberglass in the Loom & Leaf?
No. Saatva states that Loom & Leaf contains no fiberglass and uses a plant-based thistle-pulp flame barrier.
Do I need a box spring?
No. A solid platform or slats spaced less than 4 inches apart will work, and queen or larger frames need center support. You can also use a sturdy, sag-free foundation or box spring.
What’s the difference between Relaxed Firm and Firm?
Relaxed Firm contours more deeply around the shoulders and hips. Firm holds the body higher and provides steadier midsection support, making it the better fit for most back and stomach sleepers.
